O Scale Machine Shop Series MT
Now Available
OK so the detail is evident... enough said about that.
When C.H.B. Models originally released this series in the early 1990's it quite simply
set a new standard for O Scale: no debate. The re-release of this series continues
the high standard that Charlie Brommer achieved. The castings are stunning
in their clarity and quality. Working with the original brass masters now for
nearly ten years has been an incredible learning experience. As with most of
the CHB Models kits, production castings are made from the original masters.
In other words... the crispness and lack of flash sets a new standard for today.
Just wait until you see these beauties.
Just wait till you build the machines, you'll swear they actually run!

Scroll down for additional pictures and ordering information

Kit. No.

MT-500
MT-510
MT-520
MT-530
MT-540
MT-560
MT-580

MT-SET

VB-630

ME-812

MT- CMP

Description

24 inch Engine Lathe
36 inch Vertical Drill
Pedestal Grinder, Power Hacksaw, 18 inch Drill Press
Shaper
Universal Miller
Single Bolt Cutter
Line Shaft for Machine Shop Series MT

Complete Set of Machinery listed above plus
enhanced construction manual


30 hp Sumner Iron Works Vertical Boiler

8 x 12 Nagle Engine & Boiler Works
Single Cylinder Mill Engine

Machine Shop set listed above (MT-SET)
plus VB-630 and ME-812
plus machine shop figure and detail set.

Cost

$45.00
$45.00
$45.00
$45.00
$45.00
$45.00
$45.00

$305.00



$60.00

$65.00


$465.00

Machine Shop Series MT-CMP
The complete Machine Shop!

Machine Shop set listed above (MT-SET)
plus VB-630 Vertical Boiler and ME-812 Single Cylinder Mill Engine
plus 4 machine shop figures and interior detail set item number ODS1.
Click here for specific information on the detail set
This is a $535+ value
only $465.00 each plus shipping

All kits include our beautiful white metal castings, brass wire,
detailed drawings, photographs, and assembly/weathering instructions.
No additional parts are required to finish the kits.
If you don't purchase one of the sets listed above you will want to
pick up the line shaft kit which includes hangers, shafts, power cones
wheels, belt material, and instructions for arranging and driving the machines
as well as our vertical boiler and single cylinder mill engine.
They are designed to mate perfectly with the machinery.

Click Here to see these kits in action
the wonderful modeling of Brian Nolan and Chuck Doan...

MT-500
24 Inch Engine Lathe
Based Upon a 24 inch Eureka Engine Lathe
manufactured by Rahn-Mayer & Carpenter of Cincinnati, Ohio

Machine Shop Series MT-500
24 Inch Engine Lathe
$45.00 plus shipping

MT-510
36 Inch Vertical Drill
Based Upon a 36 inch Gear Fed Vertical Drill
manufactured by Prentice Bros. of Worcester, Massachusetts

Machine Shop Series MT-510
36 Inch Vertical Drill
$45.00 plus shipping

MT-520
Pedestal Grinder, Power Hacksaw, and 18 Inch Drill Press

Machine Shop Series MT-520
Pedestal Grinder, Power Hacksaw, and 18 Inch Drill Press
$45.00 plus shipping

MT-530
Crank Shaper
Based Upon a #7 Back Geared Crank Shaper
manufactured by Smith & Mill of Cincinnati, Ohio

Machine Shop Series MT-530
Crank Shaper
$45.00 plus shipping

MT-540
Universal Miller
Based Upon a #3 Universal Miller
manufactured by Brown & Sharpe of North Kingstown, Rhode Island

Machine Shop Series MT-540
Universal Miller
$45.00 plus shipping

MT-560
Single Bolt Cutter
Based Upon a #5 Single Bolt Cutter
manufactured by Adams of Lincolnwood, Illinois

Machine Shop Series MT-560
Single Bolt Cutter
$45.00 plus shipping

MT-580
Line Shaft Kit
Includes hangers, shafts, power cones, belt strikers,
wheels, belt material, and instructions for arranging and driving the machines.
This kit is necessary along with the boiler and mill engine listed below.

Machine Shop Series MT-580
Line Shaft Kit
$45.00 plus shipping

VB-630 and ME-812
30 hp Sumner Iron Works Vertical Boiler
8 x 12 Nagle Engine & Boiler Works
Single Cylinder Mill Engine

Here is a shot from Brian Nolan's award winning diorama showing the
VB-630 and ME-812 in action powering his machine shop.
Note that scenery, the structure, and the additional details pictured are not included.
The Complete Set MT-CMP includes those extra goodies!

Machine Shop Series VB-630
Vertical Boiler
$60.00 plus shipping

Machine Shop Series ME-812
Single Cylinder Mill Engine
$65.00 plus shipping

Click Here to see these kits in action
the wonderful modeling of Brian Nolan and Chuck Doan...